Eltra – Carbon/Sulfur Analyzer – ELEMENTRAC CS-i

  • MYANMAR

    DKSH (Myanmar) Ltd.
    No. 013, Thitsar Road, Yankin Township,
    Yangon, Myanmar 11081

    +951 8565270

    Email

  • ELEMENTRAC CS-I Factsheet – ELtra


The elemental analyzer ELEMENTRAC CS-i measures the carbon and sulfur concentration in predominantly inorganic samples through combustion in an induction furnace and the subsequent analysis of the gaseous combustion products carbon dioxide and sulfur dioxide.

The high temperature of more than 2000 °C ensures complete decomposition of the sample and thus reliable and accurate elemental analysis over a wide concentration range.

The ELEMENTRAC CS-i meets and exceeds the requirements of all common standards for carbon and sulfur measurement, such as ASTM E1019, DIN EN ISO 15350.

Application Examples

Alloys, carbides, cast iron, cement, ceramics, copper, glass, iron, minerals, ores, refractory metals, sand, steel, titanium

Function Principle

Carbon / Sulfur Analyzer CS-i: Operation

Operating the CS-i is simple and safe. After weighing the sample in a ceramic crucible, the weight is transferred from the interfaced balance to the PC. If required, sample weights can also be entered manually. Then an accelerator (such as iron or tungsten) is added and, after having placed the crucible on the pedestal, the analysis starts. The analysis time is 40 to 50 seconds. The detector signals and instrument parameters are displayed during analysis. Evaluation of the signals and display of the results are done automatically; the data can be transferred to a laboratory information management system (LIMS). The CS-i requires minimum maintenance. The particle filters and chemicals which need to be maintained are easily accessible.

Carbon/Sulfur Analyzer CS-i: Measuring Principle

In the induction furnace the sample is melted in a pure oxygen atmosphere, causing sulfur to react to sulfur dioxide (SO2) and carbon to a mixture of carbon monoxide (CO) and carbon dioxide (CO2). The combustion gases pass through a dust filter and moisture absorber for purification. In the next step the sulfur dioxide is detected in infrared cells. In the CS-i infrared cells with different sensitivities (high/low) can be adapted according to the user’s requirements. Oxidation of both, carbon monoxide to carbon dioxide and sulfur dioxide to sulfur trioxide follow the sulfur measurement. The SO3 gas is removed with cellulose wool; the carbon content is detected by infrared cells which can be individually customized. The ELTRA CS-i analyzer can be equipped with up to 4 independent infrared cells.

Technical Specifications

Measured elementscarbon, sulfur
Samplesinorganic
Furnace alignmentvertical
Sample carrierceramic crucibles
Field of applicationconstruction materials, engineering / electronics, geology / mining, glass / ceramics, steel / metallurgy
Furnaceinduction furnace, above 2,000 °C
Detection methodsolid state infrared absorption
Number of IR cells1 – 4
Material of IR pathaluminum (optional gold)
Typical analysis time40 seconds (nominal)
Chemicals requiredmagnesium perchlorate, platinum-based catalyst, sodium hydroxide
Gas requiredcompressed air (4 bar/ 60 psi)
oxygen 99.5 % pure (2 – 4 bar / 30 – 60 psi)oxygen 99.5 % pure (2 – 4 bar / 30 – 60 psi)
Power requirements230 V, 50/60 Hz, max. 15 A, 3450 W
Dimensions (W x H x D)52 x 84 x 75 cm
Weight~ 150 kg
Required equipmentbalance (resolution 0.0001g), monitor, PC
Optional accessoriesAutoloader (for 36 or 130 crucibles), carrier gas purification, halogen trap, HTF-540 pre-heating furnace, voltage stabilizer 5 KVA

Key Features

ELEMENTRAC CS-i

  • Simultaneous carbon and sulfur determination with minimal sample preparation
  • Wide range of inorganic materials can be analyzed
  • Freely selectable configuration of each IR cell
  • Optional gold IR path for analysis of halogen or acid containing samples
  • Control of induction performance provides more precise analysis of samples with low melting temperature
  • Powerful (2.2 kW) induction furnace for temperatures above 2,000 °C
  • NEW: automatic vacuum cleaning system ensures higher measurement precision and stability
  • Heated and easily accessible dust trap allows for improved sulfur detection
  • Optimized catalyst reactor permits more accurate carbon detection
  • NEW: ELEMENTS software with comprehensive analysis and diagnosis tools (supporting data and application export, comment fields, and many more)
  • Single and multipoint calibration
  • Low maintenance
  • Robust design allows usage in production control and laboratory

Product Advantges

  • Simultaneous carbon and sulfur determination with minimal sample preparation
  • Wide range of inorganic materials can be analyzed
  • Freely selectable configuration of each IR cell
  • Optional gold IR path for analysis of halogen or acid containing samples
  • Control of induction performance provides more precise analysis of samples with low melting temperature
  • Powerful (2.2 kW) induction furnace for temperatures above 2,000 °C

Key Industries

  • Construction
  • Education & Academics
  • Machinery & Manufacturing
  • Mining & Minerals
  • Service

Brand

Eltra

ELTRA is a specialist for elemental analyzers for the accurate and rapid analysis of solid materials. ELTRA equipment is a standard for elemental analysis in industries such as mining, steel, energy, cement and metal working.

ELTRA analyzers are used to reliably determine elements like carbon, hydrogen, sulfur, oxygen and nitrogen, and cover a wide, dynamic measuring range. The ability to adapt each analyzer to user specifications allows the precise measurement of a great variety of organic and inorganic samples in a multitude of applications.

test block for Laos

Your download – just a few steps away

Please enter your details here:

test

Contact us